Safe Deck Anti Slip Coating for Exterior Wooden Decks

Product Details

Safe-Deck SD Series
Safe-Deck is a semi-industrial, hard-wearing acrylic coating system that has been especially formulated for use on sundecks, balconies, boat decks, steps, concrete areas, tennis courts, basement floors, etc.

Safe-Deck is easy to apply and dries in 3 to 5 hours between coats depending on atmospheric and temperature conditions. A deck coated with Safe-Deck can be used the next day if the drying conditions were correct. Its flexibility is one of its many outstanding features. Safe-Deck has been job proven for 20 years, both on new wood and over other coatings. Can be applied over stain, paint, neoprene-hypalon types, canvas, fiberglass, etc. Make sure that the surface is well prepared before coating. Remove any loose material and sand any glossy areas to ensure a good bond. A thorough scrubbing with TSP solution and rinsing with clean water is recommended. Then allow drying.
To correct blisters and peeling on previously coated decks, cut out the blisters and feather the edges of the solid coating. Sand the exposed wood. Tape any joints with primer and tape, then apply the primer coat and base coat. After all areas are repaired, apply a color coat over the entire deck.
A primer is not required over other solid coatings or concrete. The primer is used only on new wood or sanded old decks where the wood is exposed. Thorough sanding of painted or stained decks is recommended.
Previously Coated or Painted Decks