Products by Pack Air Inc.
Find the right products and services for your business.
Have experience with Pack Air Inc.? Be the first to leave a review.
Pallet conveyors are designed to move pallets, large totes and other heavy loads. Our standard frames are constructed from 1/4″ steel plate and can convey up to a 4,000 pound load. Loads that reach up to 10,000 pounds are also available as custom pallet conveyor systems. Read more »
Most production lines run multiple SKU’s with variable lengths, widths and heights. Our family of EVO quick adjust guide rails, hold down rails, and lift up rails offer positive shaft driven adjustment for multiple conveyors from a single adjustment point to quickly and accurately change over... Read more »
There is no better way to describe this piece of equipment than to say they are like giant air hockey tables. Averaging 50-100 square feet, these tables can float large and heavy products on a cushion of air for effortless operator handling. However, the product itself must have enough surface... Read more »
Louvered Carry Way Air Conveyors use both round holes for flotation and directional louvers to provide forward thrust with no contact on bottom of the product. This means that this type of conveyor has unique capabilities that allow for product handling unlike any other chain, belt, or roller... Read more »
Pack Air’s Air Trim Removal systems are driven by an integral blower, they do NOT operate from a plant vacuum source. These systems are capable of transporting paper, cardboard, wood, plastic or other relatively light weight trim and scrap vertically 15-20 feet and horizontally up to 150 feet... Read more »
There are some other conveying tricks we can perform with air, one of which is vacuum. By pulling a vacuum through the chain or belt on a sealed conveyor frame we can create negative pressure that can be used to stabilize an otherwise tippy product or help a slippery product up an incline.... Read more »
Pass-through conveyors are engineered to create safe routes for operators to navigate through the production line. They have the ability to retract, pivot vertically or horizontally, or roll out of the way to accommodate personnel, carts, and fork trucks. Read more »
Right angle transfers are needed primarily for changes in product orientation and as product rejects. Pop-up Transfers, Pushers, Passive On & Off conveyors, and RATs are some of the devices we offer to perform a right transfer on your conveyor line. With so many options, consult Pack Air to... Read more »
Rotating or turning a product on a flat surface about its vertical axis can be done with a number of different devices. Twin Chain Turners, Bump Posts, Turntables, In-line Pop-up Rotates, and Horizontal Starwheels are all options that can be considered depending on your product. Read more »
When your product needs to be reoriented in a twisting or rolling axis in direction of flow Pack Air offers a number of standardized and custom solutions including Helical Twist Upenders, Upender Arms, Knockdown Rails, Side Waterfalls, Barrel Turners and Product Flippers. Read more »
Rotating a product forward in direction of flow can be tricky. Too much forward momentum can cause a product to tumble further forward than wanted, and other factors such as the takeaway conveyor speed can cause products to tip backwards. Pack Air uses devices called Starwheels and Waterfalls... Read more »
Accumulators allow critical machines on your production line to keep running when there are disruptions in other parts of the line. Many different styles including On-Line, Off-Line, Zero Pressure, Low Back Pressure, and others are available depending on your application. Read more »
Although many types of conveyors could be used to move Cases and Bundles, our go-to for this category is typically roller conveyor. MDR (Motor Driven Roller), Line Shaft, Gravity, and Light Duty CDLR (Chain Driven Live Roller), all use 1.9” diameter rollers that work well for conveying cases,... Read more »
Diverts and Merges do exactly the name implies. They divert one or more infeed lanes of product flow into multiple discharge lanes, or merge multiple infeed lanes into a lesser number of discharge lanes. Some diverts and merges are static, meaning they are set in position and stay that way for... Read more »
As Pack Air has developed, so too has our diverting technology. The Servo Driven Rack and Pinion Diverts represent the latest developments in horizontal and vertical diverting technology. These Diverts can offer higher rates due to their ability to accelerate and decelerate aggressively yet... Read more »
Belt Conveyors date back to the early 1900’s so they can definitely be considered an older technology, but they still have their place in todays material handling industry. The ability to layer different fabrics, polymers, and rubber into a single belt with various surface textures on each side... Read more »
Pack Air uses hundreds of variations of Straight Running and Side Flexing Plastic, Steel and Stainless Steel conveyor chains from multiple chain manufacturers as the starting point for this type of conveyor construction. These chains, in conjunction with a robust Mild Steel Painted conveyor... Read more »
Plastic Modular Belts come in endless variations of widths, thicknesses, strengths, and configurations. Most are available with a multitude of attachments or accessories designed for very specific needs. Pack Air works very closely with several different major Plastic Modular Belt... Read more »
Stainless Steel bolted construction is best used for bottling, filling, rinsing, bakery (BISSC), high humidity areas, coolers & freezers, chemical resistance, sealed food, and processes prone to occasional liquid spills. We would consider this to be a washdown product and not sanitary. Read more »
Welded Stainless construction can also be known as Sanitary construction, but every customer can have different requirements for what they consider sanitary for their particular industry. That’s why Pack Air offers many different sanitary features that can be picked à la carte to achieve the... Read more »
Available in 30, 45, 90 or 180 degree turns and special angles, a Zero Tangent may be just what you need to get out of, or into, a tight spot. Without the need for traditional straight drive and idle ends, this special conveyor may not only save space, but it may also save your layout. Read more »
Grippers utilize rubber bulbs to lightly squeeze products to raise or lower them, change orientation, or follow special paths. Standard Grippers are available in “S”, “C”, “Upender”, and straight configurations, but many other specials including inverted are available. Read more »
Because Pack Air is very engineering intense, we are well suited to designing and building custom material handling devices that may or may not be considered a conveyor. We like to push our boundaries and take on a few special projects every year that really require thinking outside of the box.... Read more »
To manufacture our conveyor and custom material handling equipment Pack Air has some of the most talented welders and fabricators in Wisconsin. Whether your conveyor project requires a work platform, mezzanine, or walk-over, or whether the special fabrication is the job itself, Pack Air has the... Read more »
Industrial Controls are needed to make mechanical equipment run. Some of our customers prefer to handle this part of the project themselves, but Pack Air does offer a full Controls Department capable of designing and building everything you need to run your new system. From a simple motor... Read more »
Let users know what you would have wanted to know about this company.
